View/Change Diagram

Cayenne 2011-14 - Engine

Known as: moulded hose

View/Change Diagram

924 1980-85 - Engine

If you find a leak in one of your coolant hoses chances are that there will be another failing soon! We have put together a kit with the hoses you will need so you only need drain your coolant (and get dirty) once!

Kit consists of:

1 - g95110624503 - radiator hose

1 - t95110623704 - radiator hose - eta two weeks

1 - s95110624101 - radiator hose - eta two weeks

1 - t95110632102 - o.e.m. Water hose

1 - t95110623901 - dayco radiator hose

1 - r95110624901 - elaplast radiator hose

1 - g95110632202 - rubber hose

General Fitment

This sleeve connects the pressure valve housing to the suction pipe and the suction pipe to the turbocharger inlet. We recommend updating the hose clamps to complete the installation, part # 99951235102 high-quality OEM replacement, designed to perform like the original. We source this part in Germany to ensure quality, reliability and precise fitment. Please note: this will not fit turbo s models, the turbo s model uses part # 930 110 363 00. Sold individually. 2 necessary per car.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1978-83 - Engine	911 1984-86 - Engine
911 1987-89 - Engine	930 1975-77 - Fuel/Exhaust
930 1975-77 - Fuel/Exhaust

Known as: hose clamp 40 -60/9

View/Change Diagram

911 1994-98 - Engine

Known as: pressure hose

View/Change Diagram

911 1994-98 - Engine

Known as: pressure hose

View/Change Diagram

911 1994-98 - Engine

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

924 1986-88 - Pedal System/Levers	944 1985-88 - Pedal System/Levers
944 1989-91 - Pedal System/Levers

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

View/Change Diagram

911 1984-86 - Engine	911 1987-89 - Engine
924 1980-85 - Engine	911 1989-94 - Engine

Known as: water hose

View/Change Diagram

944 1985-88 - Engine

944 1989-91 - Engine

Known as: intake socket

View/Change Diagram

911 1974-77 - Brakes/Wheels	911 1978-83 - Brakes/Wheels
911 1984-86 - Brakes/Wheels	911 1987-89 - Brakes/Wheels
930 1975-77 - Brakes/Wheels

Replacement reinforced boost hose kit. Eliminate a common problem on the 993 turbo. On most all modified 993 turbos the OEM boost hoses will leak and blow out with higher boost pressure under acceleration. These hoses will also begin to deteriorate and leak as they age. Replace your OEM hoses with this reinforced boost hose kit. All of these hose kits are pressure tested and will not burst even under the most extreme operating and environmental conditions. This reinforced boost hose kit comes as a complete bolt on kit.
From turbo to intercooler
43 / 57 mm x 410 mm

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock...(choose a part on the right to read more)

General Fitment

Fabspeed for years has manufactures the worlds highest quality "maxflo" t304 stainless steel exhaust systems, carbon fiber style high performance air intake systems and more for Porsche, ferrari, maserati and lamborghini cars. All parts have been dyno tested and are street and track proven.

Fabspeed has just introduced their own intercooler system with the release of the fabspeed long-neck intercooler. Long-neck intercooler is the most efficient intercooler on the market with technology that flows as much as 900 cfm @2.6/1 pr ratio with less than 1 psi drop.


For k27 turbo

General Fitment

Fabspeed for years has manufactures the worlds highest quality "maxflo" t304 stainless steel exhaust systems, carbon fiber style high performance air intake systems and more for Porsche, ferrari, maserati and lamborghini cars. All parts have been dyno tested and are street and track proven.

Fabspeed has just introduced their own intercooler system with the release of the fabspeed long-neck intercooler. Long-neck intercooler is the most efficient intercooler on the market with technology that flows as much as 900 cfm @2.6/1 pr ratio with less than 1 psi drop.


For stock turbo

General Fitment

Product details:

Replaces and bypasses factory re-circulation system, funneling air directly into the intercooler for increased performance and significant weight savings

Features:

-fits all Porsche 911 turbo 930 vehicles (1976-1989)
-eliminates faulty o-ring assembly
-compatible with OEM intercooler, fabspeed’s long-neck performance intercooler, and most others
-includes all required hose clamps
-simple diy installation
-all fabspeed performance products are backed by the fabspeed lifetime limited warranty

General Fitment

For adaptation of GT2 intake tube.

General Fitment

Silicone boost hose

Replacement boost hose eliminates common boost hose "blow outs" on modified turbo's.

Facts:

tested to withstand over 75 psi (5 bar) boost pressure.
fuel and oil resistant
temperature range between - 50 to + 180 degrees
bolt on kit


Over time the OEM hose tend to expand and contract under higher load, which leads to leaks, or "blow outs".

The hose is a bolt on.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

General Fitment

As the horsepower on your 997 turbo increases, so does the need for preventative products to ensure your boost is holding strong. The stock boost hoses are much like a rubber brake line that expands outwards under pressure. This causes a loss in boost pressure and can sometimes relate to the hose blowing off the turbo or y-pipe leaving you stranded. Because the agency power silicone boost hoses are made from 4ply silicone with cnc machined 6061 aluminum ends, they will never pop off. The property of the silicone also keeps it at a fixed circumference as the silicone will not expand.

The new agency power Porsche 997 turbo boost hoses are sold as a set of 4 to replace your 2 top hoses off the y-pipe to the int...(choose a part on the right to read more)

General Fitment

FVD Brombacherstainless steel lines for Porsche are manufactured in europe and are TUV approved. They consist of a ptfe teflon inner liner surrounded by a stainless steel (inox) braided cover. This construction ensures minimal expansion inside the hose core. FVD Brombacherhas been tuning Porsche vehicles for over 30 + years now, so rest assured that our lines are a direct bolt on replacement for each Porsche application. This is a direct replacement for original part # 993 314 477 02

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Continuing the process of building the ultimate Porsche 996tt, agency power has developed these highly engineered and proven silicone boost hose kits. Like any turbo charged vehicle, air needs to flow in the most efficient way to maximize performance. At a certain level, factory components will not produce the same results. Agency power's silicone boost hose kit replaces the 4 factory rubber boost hoses with these high quality and purpose driven silicone kit. The silicone hoses each have a precision cnc machined 6061 aluminum ends for a secure and direct fit into the factory or aftermarket intercoolers and intake manifold. Each machined aluminum part is barbed to give a secure fit and then the silicone is clam...(choose a part on the right to read more)

General Fitment

Silicone boost hose kit FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's. Facts: tested to withstand over 75 psi (5 bar) boost pressure.fuel and oil resistanttemperature range between - 50 to + 180 degreesbolt on kit over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts. Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.

This item may need to be sourced from germ...(choose a part on the right to read more)

Ersetzt den originalen gummischlauch.

Verbesserung des druckpunks und ansprechen der kupplung.

General Fitment

Silicone boost hose kit

FVD's direct replacement boost hose kit eliminates common boost hose "blow outs" on modified turbo's.

Facts:

tested to withstand over 75 psi (5 bar) boost pressure.
fuel and oil resistant
temperature range between - 50 to + 180 degrees
bolt on kit


Over time the OEM boost hoses tend to expand and contract under higher load, which leads to leaks, or "blow outs". Also, the OEM aluminum end does not secure properly into the intercooler, which causes boost leaks, and boost hose blowouts.

Our machined billet ends are a perfect secure fit and our silicone hose is designed not to expand under boost pressure. The hose kit is a complete bolt on kit.

Thi...(choose a part on the right to read more)

General Fitment